Epson

How Do I Fix Epson Error Code 0x97? 

How Can Epson Error Code 0x97 Be Fixed?

Even while Epson printers are known for their reliability and superior print quality, every electronic device can occasionally have issues. One of the more frustrating problems that Epson customers have is the infamous Epson error number 0x97. Don’t worry if you’re looking at a flashing error notice on your screen or the display panel of your printer. 

Explaining Epson Error Code 0x97, its causes, and—most importantly—how to fix it are the main goals of this site. When you’re setting up a new Epson printer or printing important papers, this problem might be a big challenge. But don’t worry, we’ll walk you through many doable solutions. 

What is Epson Error Code 0x97? 

Epson Error 0x97 is a warning sign that usually appears on Epson models such as the WF-3640, WF-7610, WF-3620, and WF-4630. It indicates a hardware problem, usually with the motherboard or other internal printer components. Unlike software errors, this issue typically points to a printer hardware breakdown. 

Users may experience this problem when printing, especially if the printer stops suddenly during a task and the control panel displays a warning with the number 0x97. Epson Printer Error Code 0x97 is one of the more worrying issues as it usually prevents you from using the printer again until it is rectified. 

What Causes Epson Error Code 0x97? 

Knowing the potential reasons can help you deal with the issue more skillfully. Typical offenders include: 

  • Failure of internal hardware 
  • Problems with the logic board or motherboard 
  • Ink cartridges that are damaged or clogged 
  • Firmware errors or power spikes 
  • Incorrect Epson printer configuration 

After learning what it is and potential causes, let’s have a look at how to resolve Epson Printer Error Code step-by-step. 

Methods for Resolving Epson Printer Error Code 0x97 

1. The printer may be turned on and off. 

Sometimes temporary hardware problems can be fixed by turning the printer on and off. 

Actions to take: 

  • Unplug all of the cables and turn off the Epson printer. 
  • Give it at least five minutes. 
  • To remove any remaining electricity, press and hold the power button for one minute.
  • Re-plug everything, then switch on the printer. 
  • If the Error Code 0x97 Epson disappears, you’re in luck. If not, ensue to the next solution. 

2. Disconnect and Reattach Parts 

In order to guarantee correct Epson Printer Setup, this step entails detaching and reconnecting all detachable parts. 

Actions to take: 

  • Unplug the printer and turn it off. 
  • Take out all of the cartridges, USBs, and cords. 
  • Securely reconnect everything. 
  • Turn the gadget back on. 
  • By doing this, any misunderstandings between the firmware and hardware may be fixed and the internal connections are reset. 

3. Make the printhead clean. 

Epson Error Code 0x97 may be caused by a clogged printhead, particularly if ink residue results in internal printer electrical issues. 

Actions to take: 

  • Unplug the printer and turn it off. 
  • Find the printhead by opening the printer lid. 
  • A little amount of isopropyl alcohol and a lint-free cloth can be used to gently clean the printhead and ink pads.
  • Allow the printer to dry for fifteen minutes before reconnecting it. 
  • After rebooting, try printing a document. You could require more sophisticated solutions if the problem continues. 

4. Update the firmware 

Epson Printer Error Code 0x97 can occasionally be caused by communication problems caused by an out-of-date or damaged firmware. 

Actions to take: 

  • Go to the official Epson help page. 
  • For your printer model, get the most recent firmware. 
  • Follow the on-screen instructions to update the firmware over USB or the network.
  • After upgrading, restart your printer to see whether the Epson Printer Error Code still occurs. 

5. Make use of the Printer Diagnostic Tool from Epson 

For a variety of printer models, Epson offers diagnostic tools that can be used to find and occasionally resolve hardware problems. 

Actions to take: 

  • Get the tool from the Epson support website. 
  • Run it via USB or on a PC linked to the same network. 
  • To check for hardware issues, adhere to the instructions. 
  • Sometimes motherboard-level problems or other hardware flaws that cause Error Code 0x97 Epson can be found with this utility. 

6. Speak with Support or Think About Repairing 

If nothing else works, it might be time to contact assistance. Do-it-yourself fixes might not be sufficient, especially if a failing motherboard is the root of the problem. 

  • Epson will often provide a replacement if your printer is still shielded under assurance. 
  • If the printer is out of warranty, think about taking it to an approved repair shop. 

How Can Future Printer Errors Be Prevented?

To reduce the likelihood of encountering Epson Printer Error Code 0x97 again:  

  • Clean the printhead as part of routine maintenance. 
  • Steer clear of using ink cartridges from third parties. 
  • Make sure the Epson printer configuration complies with the manufacturer’s instructions. 
  • Maintain firmware updates. 

Concluding remarks 

Dealing with Epson Error Code 0x97 can be inconvenient, especially if it interrupts your workflow suddenly. However, many users have successfully resolved this issue by utilizing one of the previously suggested methods, which vary from a simple power cycle to a thorough firmware update or professional help. 

Don’t undervalue the significance of appropriate setup and upkeep. Small mistakes made while first configuring an Epson printer or neglecting to do routine cleaning and updates are the root cause of many hardware faults. Being proactive can help you keep your printer in good working order and avoid unplanned interruptions.   

 FAQS

Does Epson Error 0x97 affect all models?

No, not all models are impacted by Epson Error 0x97. Although certain printer models are more susceptible than others, it typically occurs in particular printer series as a result of hardware or firmware problems.

Internal hardware malfunctions, damaged firmware, overheating, or problems with the printer’s electrical components during a print job can all cause error 0x97 to emerge unexpectedly and disrupt regular functioning.

Error 0x97 is frequently caused by hardware or system issues rather than ink levels, therefore changing the ink cartridges does not always resolve the issue. But occasionally, defective cartridges may be a factor in the issue.

If blockage is impairing performance, cleaning the printhead could assist. However, Error 0x97 typically indicates more serious hardware or firmware issues that need for expert repair or more complex troubleshooting than simple cleaning.